Do you have ugly brown stains in your bathroom, kitchen or laundry room? It sounds like you have a high iron content in your water, which can not only cause damage to your home but to your health as well. Iron is one of the most troublesome water contaminants. Even when it’s below the level where it’s considered unhealthy or detectable, it can still have adverse effects. Here’s what you should know about removing iron from your water to minimize its effects on your home.
If you begin to notice that your water is leaving reddish, brown stains all over your basin or appliances, this is a tell-tale sign that you have an iron and manganese problem. Iron is a common water contaminant as it’s an element in Earth’s crust. This means that water can move through the ground and soil. When this occurs, the water picks it up and that’s how it gets into the groundwater. Iron pipes may also corrode and carry iron in the water supply. The result? A gross stain and an objectionable color, taste or odor. While iron is the primary cause of this issue, manganese may also be present as it’s common to find it in water where iron is present.
You may identify iron as a problem in your kitchen if your dishes smell or if there are certain visual identifiers present. For example, the same type of brown stains and dirty brown water may exist in your kitchen that does in your bathroom. Your dishwasher may also look brown and ugly or smell like rusty iron. Iron is not only unpleasant an unappealing in both sight and taste in your kitchen, but it often impacts the plumbing. With too much iron build-up and residue, even water treatment equipment can have trouble. This is why it’s essential to treat the issue early and often whenever you notice it.
Dirty water in your washer is so frustrating! Just like your dishwasher, you’re attempting to clean your clothes or dishes, not make them dirtier. Unfortunately, iron in your water can cause your clothing to start having a dirty brown color (yuck!) and even smell like rusty iron. This coloring and smell are so unappealing that it won’t be long before you realize it and seek a solution.
The bathroom is a common spot in the house to see iron stains. Ugly brown stains may appear in the tub or sink basin. You may smell rusty water coming from the faucet, or dirty rusty shower water may come from the spigot. Bathing in water with iron-content can impact your skin, so it’s crucial to take steps to reduce the levels of iron in your water as soon as possible.
Any time you believe your water source is compromised, don’t delay acting. You never know when it could impact your health. Even when levels of a certain contaminant aren’t fatal, it doesn’t mean it isn’t harmful. Iron levels as low as 0.3 parts per million (0.00003) can start to stain your home with those unsightly brown stains. This is also the acceptable level of iron in drinking water 0.3 mg/l (ppm) and the point around which you’ll start to taste it (as is common for drinking level standards). While the iron limit in drinking water is technically 0.3 mg/l (ppm), it does have some lesser-known health effects such as acne or severe impacts like liver failure.
When your skin is exposed to high levels of iron, you’re at risk of suffering acne or other skin conditions. This is due to the fact that iron clogs up pores and results in breakouts. Excess iron can also damage the skin cells or other internal organs like the liver, pancreas or heart. You may also suffer from iron poisoning which is characterized by fatigue, joint pain, abdominal pain, and fatigue. Increased overexposure to iron can lead to diabetes, impotence, heart or liver failure or decreased sex drive. While these are serious conditions, there is a simple fix for excess iron in your water. As soon as you notice the change in your water’s taste or appearance, be sure to reach out to get the help that you need.
Like everything else in your life, moderation is key. From water to exercise to vegetables and desserts, you can have a little bit of everything as long as you don’t have too much. While iron plays a key role in human health, it can be toxic at high levels. Iron in your water is in no way a dietary supplement.
The safest and most effective way to remove iron from water is by using an iron filter. These filtration systems, such as the Iron Zapper, can help you to remove forms of iron, manganese, sulfur odors, and hydrogen sulfide. The Iron Zapper is a filter media that acts as a catalyst to promote the oxidation process. This allows all of the above contaminants to become more filterable. This process eliminates the need for chlorine, potassium permanganate or a chemical pump.
Removing iron from your water is a necessary step for a healthy, happy home. Initially, you may be put off by the nasty appearance of brown stains caused by both iron and manganese. However, if the iron persists in your water over time, you could be at risk for additional health impacts. Anything from acne to diabetes to heart failure can occur as a result of prolonged overexposure to iron. Removing the iron from your water is a safe and simple step when you have access to an iron filtration system.
Mr. Clean Water can help you set up these filtration systems to preserve your home and your health. Visit here for more information.
Get a no obligation water Quote from a trained water treatment professional. It’s absolutely FREE
Get a no obligation water analysis from a trained water treatment professional. It’s absolutely FREE
This Website was made by Avocardro.
Call us today for a new website for your business!